Precautions in the use of freezers

Classification： Company News

Release Time：2024-06-27

Placement of the freezer

1, The freezer is placed away from heat sources, and avoid direct sunlight. Because the freezer needs to work with the outside world for heat exchange, that is, through the condenser to the outside world to dissipate heat, the higher the external ambient temperature, the slower the heat dissipation, will make the freezer work longer, increasing power consumption.

2, the freezer should be placed in a dry, cool, well-ventilated place, and with a certain gap between the surrounding walls to facilitate heat dissipation.

3, the freezer should be placed in a place with low humidity, because the freezer shell, condenser, compressor are metal materials, if the air humidity is too large, will make these parts rust, shorten the service life of the freezer. At the same time, the humid overheating environment, will cause condensation on the surface of the freezer, affecting the electrical performance.

4, the freezer should be placed in a flat solid ground, and keep the compressor level. This is not only for safety reasons, but also can make the compressor work smoothly, reduce vibration and noise.

5、When the freezer is placed on the carpet, please put a wooden board under the freezer, otherwise the heat dissipation at the bottom of the freezer may discolor the carpet.

Operation of the freezer

1、Once the freezer is activated, it is better to use it continuously.

2、Rainy and humid season, the temperature is high, the surface of the freezer may be dewy, wipe it off with a dry cloth.

3, the work of the freezer, the box around the metal surface will be hot, the compressor is hot and even feel hot, is a normal phenomenon.

4, refrigerator work, refrigerant flow in the pipeline will be issued when the slight sound of running water, is a normal phenomenon.

5, the compressor starts, stops, switch parts will issue a slight impact sound, is a normal phenomenon.

Keywords： Precautions in the use of freezers